Blog

Installing a split AC is a crucial process. If the work is done correctly, your AC will work perfectly. On the other hand, if it is done poorly, you could have issues with the cooling effects. Also, it should be noted that a badly installed split AC could lead to frequent maintenance issues. This is why you need to understand the technicalities involved in split AC installation in Southgate, Mi. Here are some of the technical aspects you need to know during the installation of split AC. 

Strength of the wall to install the AC

Unlike the window AC that sits on the wall, an indoor split AC is hung on a wall. The wall must be strong enough to hold the weight of the AC and make it stay firm.

Appropriate spacing between AC and the wall

There is a need for at least 15cm distance of free space around the top and sides of a split AC. This will allow an uninterrupted flow of air and easy access for operations.

Correct Installation height from ground level

Make sure the space between the height where your split AC is hung and the ground is about 7-8 feet. This also ensures adequate cooling.

Tilt the angle of the indoor unit

Create a slight tilt angle while fixing the aluminum bracket on the wall. This will make the AC unit, the indoor unit, to get the unrestricted flow of condensed water from the drain pipe. Sure, you don’t want to get water dripping inside your home from the AC. 

Correctly position the outdoor unit

For proper cooling, ensure they are well-positioned away from direct sunlight and rain. Monitor to see that the outdoor unit of the split AC is installed in the open space where there is no obstruction to heat dissipated from the condenser outside. 

Also, the outdoor unit should rest on a solid and flat surface. It should be noted that the key components of a split AC, such as the condenser, fan motor, compressor etc., are in the outdoor unit. So, it may vibrate excessively if the unit is not placed on a flat surface. This could cause damages like coolant leakage, copper pipes breakage, and condenser or compressor damage. Besides, an excessive vibrating unit is a disturbance to the neighborhood, especially at night. 

Accurate distance between the outdoor and indoor unit

The distance between the indoor and outdoor units should be properly measured for adequate cooling. At a very low temperature, the coolant flows inside the copper tubes to and from both units of the split AC. When the refrigerant flows between the units, there is always a loss of cooling effects to the outside element. To cut off this loss, the distance between the two units (outdoor and indoor units) should be minimized. Approximately, the recommended distance between these two should be between 14-15 meters. 

Conclusion

These are the vital technicalities to understand before and during the split AC installation. Furthermore, it is recommended that you hire an experienced AC installer to carry out the installation process.